Remote Control Automatic Gate Barrier D016 for Vehicle Entrance Control

Remote Control Automatic Barrier Gate D016 for Vehicle Entrance Control

1. Main functions
 Push-to-automatic learning feature and automatically adapt to different motor and load.
 Vehicle detector selectable, so the function of "arm down when car passed”, “anti damage to cars” and "release for car team" can be set.
 Control handles with "manual / automatic" options.
 Wireless remote control can be used for long-distance and flexible control.
 Anti-stress device such as Infrared or radio waves can be used in this equipment, to reduce the incident of car damage.
 Optional RS485 or RS232 serial communications interface, simple and reliable communication protocols for easy control on the remote control with state feedback.
 Provide various modes of operation and operating parameters through the code switch settings, be able to satisfy users of different functions.
 High-speed Barrier unique features:
 Obstacle automatic detection: during lowing, arm will rise up again when detected the obstacle; while during rising, the arm will stop and unlock when detected obstacle to prevent any incident. The obstacle detection sensitivity has four degrees which is set through code switch.
 automatically unlock when no power: when gates power on and work properly, if arm is horizontal or vertical, gates will lock arm to ensure no damage or incident; when gate power off, the arm will be automatically unlock for the movements by hands. Arm has an anti-collision mechanism which can maximally reduce the damage from vehicle collision to the gates.

2 Electrical characteristics
 system integration, powerful;
 anti-jamming software and hardware watchdog ensure that no Death of single chip;
 use photoelectric sensors for place detection, non-contact work, and never migration;
 heavy and weak current completely separated, motor control using photocoupling, zero-turn-on technology, so that the control board work with high reliability and no interference;
 input and output signals of electrical isolation to ensure system reliability;
 advanced motor with thermal protection, when temperature is higher than 145 degrees, the power is automatically cut off, motor will not be burnt easily;
 Motor high reliability, long life, running a small vibration, low noise, stable speed, an instant start, back and stop;
 use rising and lowing overtime protection, to ensure that no arms run-off;